Superflex primer

Description

This water-based white primer was specifically developed for use with superflex products. However, you can also use the primer for regular paint. This primer has a high pigment content and contains a high-quality resin. If you treat a wood, plaster or metal surface with this primer as a first step, it will be properly sealed, and small imperfections will be smoothed over. You can also use the primer on glass, plastic, tiles or ceramic. Thanks to the use of this primer, products such as magnetic plaster, magnetic wallpaper and film wallcoverings adhere well to the treated surfaces.

The primer is suitable for indoor as well as outdoor use. Before use, make sure the surface is clean and dry. 750 ml of superflex primer are sufficient for 2 coats on an area of approx. 6 m². You can use a brush or paint roller for priming. Let the first coat dry for 1-2 hours before applying the second coat of primer. After applying the second coat, allow a drying time of at least 3 hours. Please note: If you want to apply whiteboard paint or wallpaper, the surface should be as smooth as possible. You should sand both layers of the dried primer so there won’t be any visible imperfections later.

Additional information about the superflex primer can be found in the material safety data sheet (PDF).