• Customer service in 4 languages
  • Over 225 000 orders annually

Block magnet 80 x 20 x 4 mm, holds approx. 18 kg

with countersunk borehole, N35, nickel-plated


Article ID CS-Q-80-20-04-N
Strength approx. 18 kg
Displacement force approx. 3,6 kg
UoS 1 piece
Price and rebate
1 pc. 7,53 EUR ea.
from 3 pcs. 6,60 EUR ea.
from 10 pcs. 5,77 EUR ea.
from 20 pcs. 5,36 EUR ea.
from 40 pcs. 5,00 EUR ea.
Ask for a rebate from 140 pcs.
incl. VAT plus shipping

7,53 EUR

incl. VAT plus shipping

currently not deliverable

...

Description

Block magnets with two countersunk boreholes. They can be fastened with countersunk screws. They are only 4 mm thick and therefore very inconspicuous when used to hang up signs, tools, etc. Especially well-suited for carpentry, kitchen installations, exhibition stand construction, shopfitting, signage technology, etc. We also carry round Pot magnets with counterbore screw-on.

Please note: Neodymium magnets are brittle and can break under excessive application of force. Therefore, we recommend a maximum tightening torque of 2 Nm when fastening this magnet.

The following screws fit into the borehole of these magnets, for example:

  • Slotted countersunk wood screw: DIN 97 (3,5 mm)
  • Cross recessed countersunk flat head screws (machine screw): ISO 7046-2 M3 (3 mm)
  • Countersunk torx screws/hexalobular socket (machine screw): ISO 14581 M3 (3 mm)
  • Hexagon socket countersunk flat head screws (machine screw): ISO 10642 M3 (3 mm)

Technical data

Article IDCS-Q-80-20-04-N
EAN7640155431453
MaterialNdFeB
Strengthapprox. 18 kg (approx. 177 N)
Length S180 mm
Length S220 mm
Height H4 mm
Borehole d14,5 mm
Countersink d29,46 mm
Countersink t2,48 mm
Distance boreholes40 mm
Tolerance+/- 0,1 mm
Coatingnickel-coated (Ni-Cu-Ni)
MagnetisationN35
Max. working temperature80°C (possibly lower)
Weight47 g
PDF data sheet

Recommended accessories for this product

Load...
5 pcs. 1,05 EUR ea.*
from 15 pcs. 0,96 EUR ea.*
from 40 pcs. 0,88 EUR ea.*
from 80 pcs. 0,84 EUR ea.*
Available: 1 390 pcs.